[Project Complete] Integra Tool & Manufacturing - $250

[IntegraTool]

(Admin code added by Palmer - 5MH97584EL926935P)

Looking for a design for business cards (one side), letter head and envelopes. Would like for all three to be similar if not the same. Preferred colors are black, forest green, and grey for business cards and black and grey for letterhead and envelopes. I'm thinking of something that highlights Integra with Tool & Manufacturing maybe below it and smaller.

This is what I need on the card
Integra Tool & Manufacturing Inc.
Mark Mudler Co-owner
100 North 72nd Ave.
Wausau, Wi 54401
715-xxx-xxxx(phone)
715-xxx-xxxx(fax)
715-581-9857(cell)
email mmudler@integra.net(not up yet)
Manufacturers of dies, gages, fixtures, and special machinery
prototypes and small lot production runs
tooling specialists

[bogglins]

is there any specific sizing? how will you print that? online printing service? or local printer?
what is the best design file format for you?

thanks! :)

[IntegraTool]

This is a start up business and this is all very new to me. I dont have any thing in mind as far as specific sizing,so do what you think works best. I am not familiar with the different design file formats so I'm not sure which is best. Printing will be done locally.

Thanks

[djaka]

do you have logo that we can start with?
thank you
regards
:)

[IntegraTool]

No logo yet. Just looking for a business card with all the info on it, and a letterhead and envelopes that somewhat match. Like I mentioned earlier, Im thinking about something that highlights "Integra" with
"Tool & Manufacturing" below it and smaller. Other than that I dont have any specific suggestions. Feel free to use your creativity.

Thanks

[IntegraTool]

Manufacturing could be abbreviated with Mfg. if you think it fits better.

[Blesseville]

One to start.

http://www.medigraph.net/do/integra1.jpg

[bogglins]

:)

[IntegraTool]

Medigraph,
I like the bold, contemporary look of the card. How about changing Manufacturing to Mfg. and adding Inc. I would like to see the font size of INTEGRA one size larger and maybe italicised. Please capitalize Tooling Specialists. Letterhead and envelopes are going to be expensive to print with all the back ink. Let's try just a black stripe above the grey one with black lettering. Also add the address, phone and fax to the envelopes.

Thanks.

[bogglins]

:)

[IntegraTool]

Hi Bogglins,
I like the second version better than the first. Try shortening manufacturing to Mfg. and adding Inc. Eliminate Integra Tool & Manufacturing Inc. from the address area. Change P, F, C, to Phone, Fax, Cell, and move cell to the left side please. Could you try to make the name larger and add Vice President. Eliminate the e but leave the email info where it is.

Thanks

[bogglins]

revisions..

a) contact details edited, "inc." added

b) integra font changed, "manufacturing" shortened

c) the fonts/text style for the contact info is wider (extended)

[Fran]

:)

http://img105.imageshack.us/img105/5606/integra1if.jpg

[Blesseville]

Thanks for the feedback. Here's the revision you asked for. The lettering may seem a bit greyish, that's due to optimized jpg file, it's actually all black.

http://www.medigraph.net/do/integra2.jpg

[Goodhaus]

:cool:

[hheine]

http://www.openmarket.com.br/DesignOutpost/integra/integra.gif

[IntegraTool]

Hello All,
I appreciate all the work and creativity everyone has put into my project. There are just a few more adjustments I'd like to see please.

Fran - Put Vice President/Co-Owner under the name on the business card. Also please change the bottom of the letterhead to Manufacturers of dies, gages, fixtures, special machinery, and prototypes - Small lot production runs - Tooling Specialists. Other than that I am very pleased with the presentation.


Midigraph - The changes you made to the business card are awesome. I do need it to say Vice President/Co-owner under the name though. I am hoping you can go back to something closer to the original design on the letterhead and envelopes. I'd like to see the original design with these changes. Leave the grey swoop but put a black swoop similar to the grey one above it. Then the Integra Tool & Mfg. Inc. will need to be in black. Be sure to leave the return address info somewhere on the envelope. Lastly add Manufacturers of dies, gages, fixtures, special machinery, and prototypes - Small lot production runs - Tooling Specialists to the bottom of the letterhead.

Regards- Integra Tool

[Blesseville]

Here's a revision: Original look with less black area to save from ink, company name in black.

http://www.medigraph.net/do/integra3.jpg

[Fran]

Hello,
thank you for your feedback. Here is my revision.
:) Fran

http://img451.imageshack.us/img451/7558/integrarev0wn.jpg

[plum74]

Hi, presenting my entry...

Lala

[IntegraTool]

Designers,
Thanks so much for all the creative ideas. I appreciate the effort that you all have put into this for me. Though it was a difficult decision and it came down to three of the designs, I have decided to use medigraph for my final design. Thanks again to everyone at Design Outpost.

Regards - Mark Mudler

[plum74]

Congratulations Medigraph! :)

[Blesseville]

Thank you Mark, I look forward to hearing about revisions if any. You can send me a private message from now on, for the exact phone numbers.

And Lala, thank you.

[Blesseville]

Hello again,
A private message (PM) is sent to you with some necessary information. You can check it here: http://www.designoutpost.com/forums/private.php?

Thanks.